Our glazes have high density; Suitable for spraying, dipping, pouring or brush application methods. It is shipped in liquid form. It is recommended to transfer at least two layers of glaze to the ceramic surface in brush applications. You can adjust its consistency by adding water to our dense glazes and apply with a brush.
In applications in the form of spraying, dipping or pouring, you should reduce the density of the glaze by adding 5-10% water. When the method of application of glazes is decided, the density and amount of application should be carefully adjusted for each method. Make sure that our glazes are homogeneously distributed in the package before application.
Make sure that your firing temperature is equal inside the oven. Before product firing, it will be useful to see the results with the trial plates and to recognize the glaze in order to get the best result. It is recommended to keep our glazes at room temperature. If the lid is left open after use, the water in the package will evaporate and the glaze will dry over time. Tightly close the lid of the packages you do not use.